Model Select

Wishlists

Click the Like button below to like Pumaspeed on Facebook.

Servicing

The Pumaspeed Team can service and maintain your vehicle. For an appointment please click here.

Opening Hours

08:00 - 18:00 GMT
Monday - Friday

You are here: Home | MAXD Workshop Fitted Remaps | MAXD Stage 1R Ford Ranger 2.3 PHEV Remap

MAXD Stage 1R Ford Ranger 2.3 PHEV Remap - Ranger 2.3 PHEV 281ps

Name: MAXD Stage 1R Ford Ranger 2.3 PHEV Remap
Brand: MAXD-OUT Software
SKU: RANGER2.3PHEV-STG1R
Price: 859.00 GBP

Ford Ranger 2.3 PHEV Stage 1R dyno gains

Workshop fitted at Pumaspeed HQ, Wakefield

Delivery Cost?

RRP: £859.00 (inc. VAT)

Our Price: £859.00 (inc. VAT)

Fully Fitted: £859.00 (inc. VAT)

Order quantity

Booking Option

Crackle on Overrun

Fuel Spec

Add a Milltek Sport exhaust

MAXD Stage 1R Ford Ranger 2.3 PHEV Remap

Ford Ranger 2.3 PHEV Stage 1R remap - 384bhp 729Nm

Ford Ranger 2.3 PHEV Stage 1R dyno sheet

Ford Ranger 2.3 PHEV dyno graph - EV + ICE vs ICE only

Ford Ranger 2.3 PHEV on the Pumaspeed dyno

Ford Ranger 2.3 PHEV strapped down on the dyno

MAXD Stage 1R Ford Ranger 2.3 PHEV Remap - 384bhp 729Nm - MAXD-OUT Software

384bhp and 729Nm on the dyno (stock 307bhp / 656Nm)
+78bhp and +73Nm over stock
MAXD Stage 1R calibration developed by Pumaspeed
Fitted at Pumaspeed HQ in Wakefield, UK
Suits the Ford Ranger 2.3 EcoBoost PHEV

Our MAXD Stage 1R remap for the new Ford Ranger 2.3 PHEV: 384 bhp and 729 Nm, proven back to back on the dyno.

The Ranger PHEV pairs Ford's 2.3 EcoBoost petrol engine with an electric motor and a plug-in battery, and from the factory it is quoted at 280 PS and 690 Nm. We developed this Stage 1R calibration on our own development truck in the Pumaspeed dyno cell, and the final map is now done.

Dyno results

	Stock	Stage 1R	Gain
Engine power	306.6 bhp	384.2 bhp	+78 bhp (+25%)
Wheel power	275.1 bhp	345.8 bhp	+71 bhp (+26%)
Peak torque	655.8 Nm	729.2 Nm	+73 Nm (+11%)

Peak torque arrives at 2,806 rpm and peak power at 5,786 rpm, and the Stage 1R map runs ahead of stock right across the rev range, so the gains are there whether you are towing, overtaking or pulling away.

Same truck, same Dastek dyno, corrected figures. Stock run 6 October 2026 (19.0°C, 991 mBar); Stage 1R runs 10 October 2026 (21.2°C, 996 mBar). Engine power is calculated by the dyno from the measured wheel figure. Results on other vehicles may vary with condition, fuel and modifications.

What you get

MAXD Stage 1R calibration developed by Pumaspeed for the Ranger 2.3 PHEV
Fitted in our workshop at Pumaspeed HQ, Wakefield
Developed and proven on the dyno, stock vs remapped

Read the full story: Ford Ranger 2.3 PHEV Stage 1R - 384 bhp and 729 Nm on the dyno.

Book yours: call the workshop on 01924 360002 or email support@pumaspeed.co.uk.

MAXD Stage 1R Ford Ranger 2.3 PHEV Remap - 384bhp 729Nm

There is no fitting cost available for this product.

Pumaspeed Performance Distribution

Pumaspeed have a specialist distribution team that can dispatch the MAXD Stage 1R Ford Ranger 2.3 PHEV Remap to any destination worldwide.

Please select the delivery country from the drop down list below to see the express delivery charge and set your shopping cart to the correct VAT rate.

Are you a trade customer?

Pumaspeed have a specialist trade distribution team that service many of the Motor trade specialists throughout the UK, the EU and the Rest of the World.

From a simple email tune file to a huge shipment of Milltek Sport Exhaust Systems. We have an expanding portfolio of new brands and products combined with the experience and ability to provide what you need.

To register your interest as a company click here.

No Reviews Yet
Click to write the first review

The MAXD Stage 1R Ford Ranger 2.3 PHEV Remap product has been listed by Pumaspeed as fitting the following vehicles:

Ranger 2.3 PHEV 281ps