My Location UK: Mainland  CurrencyRegister 

Telephone Image

Sales: 01924 360260

Workshop: 01924 360002

Presentation Image

Shopping Cart Image Your shopping cart is empty

View Basket | Checkout

  • Worldwide Express Delivery Worldwide Express Delivery
    Buy Online or Call 01924 360 260
  • Scorpion Exhausts Scorpion Exhausts
    Full range of Scorpion Exhausts now available at Pumaspeed
  • Pumaspeed Dealer Network Pumaspeed Dealer Network
  • All Make Milltek Stockist All Make Milltek Stockist
    Pumaspeed are the official Ford distribution partner for the UK and we export all Milltek Sport stainless steel exhausts worldwide!
  • All Make Milltek Stockist All Make Milltek Stockist
    Pumaspeed are the official Ford distribution partner for the UK and we export all Milltek Sport stainless steel exhausts worldwide!
Home

You are here: Home | Suspension - Wheel Spacers | Rear Axle Handling Upgrade 20.5mm

Rear Axle Handling Upgrade 20.5mm - Fiesta Mk6 Zetec-S

Axle Upgrade

Cheap, Effective A1 recommended

RRP: £56.22 (inc. VAT)

Our Price: £55.00 (inc. VAT)

Fully Fitted: £183.25 (inc. VAT)

Order quantity

Vehicle Options

Axle Upgrade

Rear Axle Handling Upgrade. - Pumaspeed Handling Kits

  • All Ford OE Parts
  • Simple DIY fit
  • BEST POUND FOR POUND MOD AVAILABLE !

Increase the handling with this simple easy fit rear axle kit.

How does it work ?
It fits in between the axle and the rear hub back plate, just as ford racing did with the Racing Puma.
It adds 20.5mm extra width per side, reducing body roll and increasing high speed stability.
Simple and effective.

Please note the are a genuine ford part and although they are listed as a 20.5mm spacer some may sizes may slightley differ

The rear wheel of the ST150, Puma, Fiesta and others can look a little lost under the axle of the car, this inexpensive modification fills the gap and stabilizes the car.

A small area of the aluminium axle spacer will need to be filed away to accommodate the mk6 fiesta / ST150

Does not increase wheel offset and bearing load.
Will not fit the front Axle
Tightening torque - 66-70 mm

Widening the track-width on your car increases the risk of your tyres catching the arches and causing damage. This risk is higher on cars fitted with aftermarket suspension, wheels or tyres. It is therefore your responsibility to ensure this is the correct part before purchasing. In some circumstances, wheel arch modifications will be necessary to avoid damage.If in doubt choose the lower width 10mm or 12.5mm kit.

Rear Axle Handling Upgrade.

The Pumaspeed Workshop team are ready to fit the Rear Axle Handling Upgrade 20.5mm in our Head Office located here.

We estimate the labour time to be approximately 1.25 hour(s) costing £128.25 inc VAT.

Therefore making parts and labour a total cost £183.25 (inc. VAT).

Please don�t hesitate to contact us on the phone number above or click here to email.

Note: The fitting cost quoted is an estimate based on our Ford tuning experience. Please be aware that on rare occasions problems can occur that are out of our control; such as seized or snapped bolts due to age or wear. We work swiftly but in the event of an issue we may have to levy the fitting charge based on the time taken to rectify any unforeseen circumstances.

Pumaspeed Performance Distribution

Pumaspeed have a specialist distribution team that can dispatch the Rear Axle Handling Upgrade 20.5mm to any destination worldwide.

Please select the delivery country from the drop down list below to see the express delivery charge and set your shopping cart to the correct VAT rate.

Are you a trade customer?

Pumaspeed have a specialist trade distribution team that service many of the Motor trade specialists throughout the UK, the EU and the Rest of the World.

From a simple email tune file to a huge shipment of Milltek Sport Exhaust Systems. We have an expanding portfolio of new brands and products combined with the experience and ability to provide what you need.

To register your interest as a company click here.

1 Reviews
Click here to view/write

5/5 stars

To post a review to our Facebook page, please click the Facebook Log In button above. Next type your Email or Phone and associated Username into the popup login panel and click the Log In button to sign into Facebook. Finally type your review in the box provided below and click the Post Review button.

Review:

The Rear Axle Handling Upgrade 20.5mm product has been listed by Pumaspeed as fitting the following vehicles:

Fiesta Mk5 Zetec S

Fiesta Mk6 Zetec-S