Pumaspeed Tapered Inlet Plenum Focus ST225 without Pumaspeed Logo - Focus ST225 / XR5 Turbo

Pumaspeed - Lifting the Game.

Delivery Cost?

RRP: £399.96 (inc. VAT)

Our Price: £369.96 (inc. VAT)

Fully Fitted: £472.56 (inc. VAT)

Order quantity  (212 Sold)

Colour :
Raw Alloy Satin Black (+� 42.00) (inc. VAT)Black Wrinkle Finish (+� 42.00) (inc. VAT)Gloss Black (+� 42.00) (inc. VAT)Metalic Green (+� 42.00) (inc. VAT)Metalic Blue (+� 42.00) (inc. VAT)Orange (+� 42.00) (inc. VAT)Wrinkle Red (+� 42.00) (inc. VAT)Gloss White (+� 42.00) (inc. VAT)

O-ring Seal Kit
Add O-Ring Seal Kit (+� 22.74) (inc. VAT)O-Ring Seal Kit Not Required

Tweet

NEW DESIGN Pumaspeed Tapered Inlet Plenum - Focus RS 2009 Mk2 / ST225 - Pumaspeed Inlet Manifolds

• Fully Tapered design
• Blank Logo Version for the Factory Look
• Fully Flow tested against all the competition to give 6% more flow. at 7000 revs and 20 PSI
• Buy direct from the manufacturer and save.
• Elevate the performance on all Volvo C30 and Focus RS / ST

The ULITMATE Tapered Intake Manifold for the Focus RS 2009 Mk2 and ST225. 

The Focus RS mk2 and Focus ST225 / Volvo inlet manifold design has been available from many suppliers for quite some time.

So why have Pumaspeed decided to enter the market and design a new unit?
After looking at  many of the designs we determined that some flowed well but could look better. Alternatively some looked beautiful but lacked the desired balanced flow of a true flow of a fully balanced Tapered design and others just looked like building bricks and shouldn't grace the under bonnet of any car let alone a Ford RS.

Elevate your car with the new Inlet from Pumaspeed.

After many conversations with engineers around the globe, our design team knew that only a fully tapered design with a cosmetic twist could really do the job for the Focus / Volvo owner, giving that all important mix of  Power, Beauty and Reliability.

It takes a lot of time in research and development to make a fully tapered Inlet work This new Pumaspeed Intake manifold plenum is the product of this  extensive R+D period where no effort was spared and no compromise taken. There were a total of 37 differing designs which resulted in a totally balanced flowing inlet that delivered 6% more intake charge than the nearest competition. More importantly it distributed the flow evenly to all 5 cylinders across the whole  rev range of the 5 cylinder Volvo engine in the New Mk2 Focus RS and Focus ST 225.

How easy is it to fit ?
Very simple is the quick answer, all the standard connection points and joints are retained so it is as simple as swapping the original out and refitting it. No injectors need to be removed.

Why does it cost so little ?
Quality of the products pumaspeed supply around the globe are very important, we provide the best at the best price we can.
When we make an item, we make many hundreds and our buying power in the Ford Tuning industry is second to none. When you buy direct from the manufacturer you save, in this case you are saving up to 30% and gaining a 6% increase in added air flow.

SO HAVE PUMSAPEED CREATED THE ULTIMATE TAPED INTAKE MANIFOLD FOR THE FOCUS RS AND ST 225 ??

THE MECHANICS BELIEVE SO,  OUR TESTING AND DESIGN DEPARTMENT BELIEVE IT TOO !

Take a quick tour around the 3D model below to see for yourself  THE ULTIMATE 5 CYLINDER INTAKE PLENUM

Click here to view our 3D PDF of the Pumaspeed Tapered Intake Manifold for the Focus RS 2009 mk2 and ST225.

            Please note that the above link has a 3D image that can be rotated and zoomed using your mouse wheel and
                                                   depending on Broadband speed could take 20 seconds to load

Showcase Images

Not Only is the Inlet easy to fit, many of our customers have added their own take on the Manifold adding their own colour to match their RS.

We want to Showcase as many of these designs as possible so send us your custom inlet paint job to info@pumaspeed.co.uk and see it here soon !!
 

	On the Left is Simon's White Tapered Inlet Manifold. Simon Sent the image through to info@pumaspeed.co.uk We were so impressed we just had to stick it up here for everyone to see.   Great work!!!
	Featured Left is Vincent's Inlet from France.He has done it in Matt Black and left the natural silver base to show the lines and the Pumaspeed Logo.   We really like this design and think it does a great job of high lighting the logo as well as giving the inlet the cool crisp finish it deserves!!!

	Didier from France has reworked his    Raw Alloy Version into a real head        Turner. Fully Wrinkle Coated     It makes a perfect Finish for that  A1  Factory look
	We really liked this Coating design, it does a great job of high lighting the logo .The Wrinkle finish is now available as an option

 

NEW DESIGN Pumaspeed Tapered Inlet Plenum - Focus RS 2009 Mk2 / ST225

The Pumaspeed Workshop team are ready to fit the Pumaspeed Tapered Inlet Plenum Focus ST225 without Pumaspeed Logo in our Head Office located here.

We estimate the labour time to be approximately 1.00 hour(s) costing £102.60 inc VAT.

Therefore making parts and labour a total cost £472.56 (inc. VAT).

Please don�t hesitate to contact us on the phone number above or click here to email.

Note: The fitting cost quoted is an estimate based on our Ford tuning experience. Please be aware that on rare occasions problems can occur that are out of our control; such as seized or snapped bolts due to age or wear. We work swiftly but in the event of an issue we may have to levy the fitting charge based on the time taken to rectify any unforeseen circumstances.

Pumaspeed Performance Distribution

Pumaspeed have a specialist distribution team that can dispatch the Pumaspeed Tapered Inlet Plenum Focus ST225 without Pumaspeed Logo to any destination worldwide.

Please select the delivery country from the drop down list below to see the express delivery charge and set your shopping cart to the correct VAT rate.

UK: Mainland UK: Highlands and Islands UK: Isle of Man UK: Isle of Wight Channel Islands Northern Ireland Afghanistan Albania Algeria American Samoa Andorra Angola Anguilla Antarctica Antigua and Barbuda Argentina Armenia Aruba Australia Austria Azerbaijan Bahamas Bahrain Bangladesh Barbados Belarus Belgium Belize Benin Bermuda Bhutan Bolivia Bosnia and Herzegowina Botswana Bouvet Island Brazil British Indian Ocean Territory Brunei Darussalam Bulgaria Burkina Faso Burundi Cambodia Cameroon Canada Cape Verde Cayman Islands Central African Republic Chad Chile China Christmas Island Cocos (Keeling) Islands Colombia Comoros Congo Cook Islands Costa Rica Cote D'Ivoire Croatia Cuba Cyprus, North Cyprus, South Czech Republic Denmark Djibouti Dominica Dominican Republic East Timor Ecuador Egypt Eire El Salvador Equatorial Guinea Eritrea Estonia Ethiopia Falkland Islands (Malvinas) Faroe Islands Fiji Finland France French Guiana French Polynesia French Southern Territories Gabon Gambia Georgia Germany Ghana Gibraltar Greece Greenland Grenada Guadeloupe Guam Guatemala Guinea Guinea-bissau Guyana Haiti Heard and Mc Donald Islands Honduras Hong Kong Hungary Iceland India Indonesia Iran (Islamic Republic of) Iraq Israel Italy Jamaica Japan Jordan Kazakhstan Kenya Kiribati Korea, Democratic People's Republic of Korea, Republic of Kuwait Kyrgyzstan Lao People's Democratic Republic Latvia Lebanon Lesotho Liberia Libyan Arab Jamahiriya Liechtenstein Lithuania Luxembourg Macau Macedonia Madagascar Malawi Malaysia Maldives Mali Malta Marshall Islands Martinique Mauritania Mauritius Mayotte Mexico Micronesia, Federated States of Moldova, Republic of Monaco Mongolia Montserrat Morocco Mozambique Myanmar Namibia Nauru Nepal Netherlands Netherlands Antilles New Caledonia New Zealand Nicaragua Niger Nigeria Niue Norfolk Island Northern Mariana Islands Norway Oman Pakistan Palau Panama Papua New Guinea Paraguay Peru Philippines Pitcairn Poland Portugal Puerto Rico Qatar Reunion Romania Russian Federation Rwanda Saint Kitts and Nevis Saint Lucia Saint Vincent and the Grenadines Samoa San Marino Sao Tome and Principe Saudi Arabia Senegal Seychelles Sierra Leone Singapore Slovakia (Slovak Republic) Slovenia Solomon Islands Somalia South Africa South Georgia and South Sandwich Spain Spain: Canaries Sri Lanka St. Helena Sudan Suriname Svalbard and Jan Mayen Islands Swaziland Sweden Switzerland Syrian Arab Republic Taiwan Tajikistan Tanzania, United Republic of Thailand Togo Tokelau Tonga Trinidad and Tobago Tunisia Turkey Turkmenistan Turks and Caicos Islands Tuvalu Uganda Ukraine United Arab Emirates United States United States Minor Outlying Islands Uruguay Uzbekistan Vanuatu Vatican City State (Holy See) Venezuela Viet Nam Virgin Islands (British) Virgin Islands (U.S.) Wallis and Futuna Islands Western Sahara Zaire Zambia Zimbabwe

Are you a trade customer?

Pumaspeed have a specialist trade distribution team that service many of the Motor trade specialists throughout the UK, the EU and the Rest of the World.

From a simple email tune file to a huge shipment of Milltek Sport Exhaust Systems. We have an expanding portfolio of new brands and products combined with the experience and ability to provide what you need.

To register your interest as a company click here.

No Reviews Yet
Click to write the first review

To post a review to our Facebook page, please click the Facebook Log In button above. Next type your Email or Phone and associated Username into the popup login panel and click the Log In button to sign into Facebook. Finally type your review in the box provided below and click the Post Review button.

Review:

The Pumaspeed Tapered Inlet Plenum Focus ST225 without Pumaspeed Logo product has been listed by Pumaspeed as fitting the following vehicles:

Focus RS Mk2 2009

Focus ST225 / XR5 Turbo

Mondeo ST 2.5T

S Max 2.5 Turbo