Maxton Design X Milltek RS Diffuser Upgrade Kit - Fiesta Mk8 ST - Fiesta ST Mk8 - Body Kits Styling - Exterior - Pumaspeed Milltek Ford Performance Tuning Milltek Sport Exhaust Ford Fiesta Focus ST RS Parts Specialist

Worldwide Leader In Aerodynamic Components

Delivery Cost?

RRP: £589.96 (inc. VAT)

Our Price: £589.00 (inc. VAT)

Fully Fitted: £787.00 (inc. VAT)

Order quantity

Surface Finish

Exhaust Tip Selection

Add Milltek GPF Back

Maxton Design Front Splitter V.3 - Fiesta Mk8 ST & ST-Line

Maxton Design X Milltek RS Diffuser Upgrade Kit - Fiesta Mk8 ST - Maxton Design

Brand new design from Maxton Design
Easy DIY fit or workshop fitting available
Available in three different finishes to suit your style
Supplied with all parts necessary for fitting
Available to dispatch direct from Maxton

Fits only: Ford Fiesta MK8 ST pre Sep 2020 or Ford Fiesta MK8 ST post Sep 2020

COMPLETE SET CONTAINS:

- Rear diffuser
- Milltek GPF/OPF back exhaust system

MILLTEK DESCRIPTION:
Every Milltek system is designed, developed and hand-finished here in the UK by time-served craftsmen, each one produced in aerospace grade type 304, non-magnetic stainless steel. This superior material is less susceptible to discolouration, lasts almost indefinitely and is used throughout the entire construction of our pipework, silencers and associated hardware.

Mandrel bending ensures constant radius bends for optimised gasflow, and bore diameters are carefully enlarged over stock to ensure ultimate performance without the loss of mid-range torque. All of the Milltek exhaust systems endure a comprehensive acoustic development process to deliver a tone that is sporty and crisp, without ever inducing NVH, drone or cabin resonance.

We always recommend the exhaust is fitted by a competent garage or tuning workshop so normally avoid issuing install guides.

MILLTEK EU TYPE-APPROVAL CERTIFICATE

The systems are 2.76 inch (70mm tube) and there are downpipes available to remove the OPF with and without Hi Flow Sports Cats.

The pre sept systems require re-use of the OEM Valve actuator, however the post sept models changed, and we therefore now supply the correct actuator to work with the same system.

There is also an Active Valve Control available for these models to give the user complete control over the valve positions at different drive modes / ranges.

The OPF-Back System is EC Approved.

REAR DIFFUSER DESCRIPTION:

** This product is a replacement for original diffuser **

CHARACTERISTICS OF REAR DIFFUSER:

- Adds aesthetic value.
- Lightweight and offers some flexibility.
- This product is made from ABS plastic. The same material is used widely in the automotive industry.

MORE INFORMATION ABOUT REAR DIFFUSER:

- No additional work is required to finish the product.
- The product will arrive with a protective film.
- Removal of the protective film will void any returns, only remove once you are certain the product will fit.
- We cannot be held responsible for the incorrect installation or use of this product.
- Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.
- We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.
- This product has been TUV MATERIALGUTACHTEN certified.
- The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.

Product is made of ABS plastic.

Available in three surface look options: textured, gloss black, carbon look.

This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).

Please note supply of these kits can take between 4-6 weeks. Contact us prior to purchase to check!

Maxton Design X Milltek RS Diffuser Upgrade Kit - Fiesta Mk8 ST

The Pumaspeed Workshop team are ready to fit the Maxton Design X Milltek RS Diffuser Upgrade Kit - Fiesta Mk8 ST in our Head Office located here.

We estimate the labour time to be approximately 2.00 hour(s) costing £198.00 inc VAT.

Therefore making parts and labour a total cost £787.00 (inc. VAT).

Please don�t hesitate to contact us on the phone number above or click here to email.

Note: The fitting cost quoted is an estimate based on our Ford tuning experience. Please be aware that on rare occasions problems can occur that are out of our control; such as seized or snapped bolts due to age or wear. We work swiftly but in the event of an issue we may have to levy the fitting charge based on the time taken to rectify any unforeseen circumstances.

Pumaspeed Performance Distribution

Pumaspeed have a specialist distribution team that can dispatch the Maxton Design X Milltek RS Diffuser Upgrade Kit - Fiesta Mk8 ST to any destination worldwide.

Please select the delivery country from the drop down list below to see the express delivery charge and set your shopping cart to the correct VAT rate.

Are you a trade customer?

Pumaspeed have a specialist trade distribution team that service many of the Motor trade specialists throughout the UK, the EU and the Rest of the World.

From a simple email tune file to a huge shipment of Milltek Sport Exhaust Systems. We have an expanding portfolio of new brands and products combined with the experience and ability to provide what you need.

To register your interest as a company click here.

No Reviews Yet
Click to write the first review

The Maxton Design X Milltek RS Diffuser Upgrade Kit - Fiesta Mk8 ST product has been listed by Pumaspeed as fitting the following vehicles:

Fiesta ST Mk8

Model Select

Wishlists

You are here: Home | Body Kits Styling - Exterior | Maxton Design X Milltek RS Diffuser Upgrade Kit - Fiesta Mk8 ST

Maxton Design X Milltek RS Diffuser Upgrade Kit - Fiesta Mk8 ST - Fiesta ST Mk8

Maxton Design X Milltek RS Diffuser Upgrade Kit - Fiesta Mk8 ST - Maxton Design

Maxton Design X Milltek RS Diffuser Upgrade Kit - Fiesta Mk8 ST

Pumaspeed Performance Distribution

Are you a trade customer?

Contact Us

Follow Us

Payment Methods