38% Uprated Double Sealed Fiesta ST180 1.6 EcoBoost Bosch Injectors Set - 1.6T Ecoboost - Fuel System - Injectors - Pumaspeed Milltek Ford Performance Tuning Milltek Sport Exhaust Ford Fiesta Focus ST RS Parts Specialist

At last the extra fuel all EcoBoost owners need

Delivery Cost?

RRP: £629.99 (inc. VAT)

Our Price: £599.99 (inc. VAT)

Fully Fitted: £728.24 (inc. VAT)

Order quantity (203 Sold)

bosch fiesta st uprated injectors pumaspeed double seal line

Uprated Fiesta ST180 1.6 EcoBoost Bosch Injector set - Bosch Injector Sets

Direct Drop in Injector to Suit all 1.6 DI EcoBoost Engines.
Full compatibility with all stock Ford and Volvo EcoBoost Motors.
Added 38% Flow Rate.
Will fuel up to 420bhp on Stock fuel Pump (in good condition).
Will fuel over 480 bhp on our uprated fuel system
Essential for over 350bhp

Pumaspeed have 2 types of Uprated Injectors available for the Ecoboost 1.6. The stock Bosch drop in type at 30% take from the Range Rover and these Custom Double Sealed versions with over 38% Extra Flow.

As Tested on the Pumaspeed 500bhp Fiesta Below

The Pumaspeed Injectors are not Range Rover 30% Type they are a full 38% larger, look at the flow test below

The explanation below shows why we have had to make the change to the design so they can be used properly in the 1.6 ecoboost head.
The vertical line is for reference purposes
As you can see the middle uprated Range Rover type injector has a seal that sits well back from the original Ford position and does not fully seal when pushed into the std position with the original collar fitted.
To fix this problem the Ford Supplied collar (not shown) has to be removed and the injector fitted lower down into the head, this is a basic fix and not good for longevity as we have found.

This method of lowering the injector into the head is easy, you simply do not fit the lower collar that clips onto the injector. This allows the injector to sit 4mm lower and does allow the white Teflon seal to seal a little better but not fully.

The injector has now been lowered by approx 4-5mm so it follows that the nozzle would protrude into the combustion chamber which would subject it to much higher temps which isn’t good.

There is only one solution to stop the nozzle from seeing excessive temps and to make a perfect seal, the position of the seal on the injector body has to be changed.

What do we do ?
Pumaspeed have our 38% larger injectors ( NOT RANGE ROVER TYPES ) precision machined to accept two seals, we then fit some original Bosch Teflon seals, new thicker black seals to achieve a complete engineered solution.so they are doubly safe

Injector over heating
if you place an injector 4-5mm lower into the cylinder head it subjects it to extreme higher temperatures which also contributes to premature seal failure and can cause detonation problems

Furthermore, seating 4-5mm closer the piston DOES affect the quality of the spray pattern and the cooling ability.

GDI (GASOLINE DIRECT INJECTION) vehicles rely heavily on fuel to cool the piston.

Thus not only do seals fail, engine internals get hotter too

Double sealed is the way, correct height, flush, correct pattern, correct cooling and quality isn’t sacrificed.

You must move over the spacer collar from the bottom seat of the factory injector.

With the very best of everything what can the new X48R make ?
The graph below shows a progressive boosting map and a solid repeatable 358bhp with the New MaxD Injector map.

Uprated Fiesta ST180 1.6 EcoBoost Bosch Injector set

The Pumaspeed Workshop team are ready to fit the 38% Uprated Double Sealed Fiesta ST180 1.6 EcoBoost Bosch Injectors Set in our Head Office located here.

We estimate the labour time to be approximately 1.25 hour(s) costing £128.25 inc VAT.

Therefore making parts and labour a total cost £728.24 (inc. VAT).

Please don�t hesitate to contact us on the phone number above or click here to email.

Note: The fitting cost quoted is an estimate based on our Ford tuning experience. Please be aware that on rare occasions problems can occur that are out of our control; such as seized or snapped bolts due to age or wear. We work swiftly but in the event of an issue we may have to levy the fitting charge based on the time taken to rectify any unforeseen circumstances.

Pumaspeed Performance Distribution

Pumaspeed have a specialist distribution team that can dispatch the 38% Uprated Double Sealed Fiesta ST180 1.6 EcoBoost Bosch Injectors Set to any destination worldwide.

Please select the delivery country from the drop down list below to see the express delivery charge and set your shopping cart to the correct VAT rate.

Are you a trade customer?

Pumaspeed have a specialist trade distribution team that service many of the Motor trade specialists throughout the UK, the EU and the Rest of the World.

From a simple email tune file to a huge shipment of Milltek Sport Exhaust Systems. We have an expanding portfolio of new brands and products combined with the experience and ability to provide what you need.

To register your interest as a company click here.

No Reviews Yet
Click to write the first review

The 38% Uprated Double Sealed Fiesta ST180 1.6 EcoBoost Bosch Injectors Set product has been listed by Pumaspeed as fitting the following vehicles:

Fiesta ST180 Mk7

Focus Mk3 1.6 EcoBoost

1.6T Ecoboost

Model Select

Wishlists

You are here: Home | Fuel System - Injectors | 38% Uprated Double Sealed Fiesta ST180 1.6 EcoBoost Bosch Injectors Set

38% Uprated Double Sealed Fiesta ST180 1.6 EcoBoost Bosch Injectors Set - 1.6T Ecoboost

Uprated Fiesta ST180 1.6 EcoBoost Bosch Injector set - Bosch Injector Sets

Uprated Fiesta ST180 1.6 EcoBoost Bosch Injector set

Pumaspeed Performance Distribution

Are you a trade customer?

Contact Us

Follow Us

Payment Methods