Pumaspeed 1.6 EcoBoost Race Red Top Engine - Fiesta ST180 Mk7

Ready to Bolt in

Call for more information.

RRP: £3,595.00 (inc. VAT)

Our Price: £3595.00 (inc. VAT)

Fully Fitted: £4,723.60 (inc. VAT)

Core Exchange
Selection RequiredI will Send My Core Unit to Pumaspeed FirstI will Send My Core Unit to Pumaspeed After (+� 1554.00) (inc. VAT)I have no Core unit to send to Pumaspeed (+� 1554.00) (inc. VAT)

Cylinder Head Option
OE Spec Recon Cylinder HeadGas Flowed (+� 528.00) (inc. VAT)Full Race Porting (+� 1020.00) (inc. VAT)

Tweet

Pumaspeed Motorsport Race EcoBoost 1.6 Engine - Ford

• Fully Built Ready to Install.
• Choice of Ported Cylinder Heads.
• Choice of Block Design and Piston Compression Ratio.

With over 20 years Experience in Fast Fords, who else would you turn to for an off the shelf crate motor for your Car.

The breakdown of each engine is shown below, but before we do this we can only keep our prices low if we take your old engine in exchange, if you do not have one, or any main part of the supplier core unit is damaged such as cracked heads or worn out cams / cranks or blocks with serious wall damage, we reserve the right to levy an extra charge on the components that are not serviceable. We can supply a Brand New Ford unit but please contact us first as the market cost does change.

What is the Core Exchange?

The Pumaspeed Red Top Engine program works on an exhange basis, much like our hybrid turbos. Due to the spec of the engine being based around the stock Ford architecture including stock Ford block and stock Ford head, we require a good condition non cracked block and head in return to ensure we can recondition them ready for the next customer.

This can be sent before we ship your Red Top engine out so you do not pay the core exchange charge out right. You can choose to send your stock engine after you receive your Red Top, upon return of a good engine block and head we then refund the core exchange fee. 

Alternatively if you wish to keep your stock engine, or you do not have a good condition engine to return to us, you can simply pay the additional core exchange for us to source a good stock engine on your behalf. 

What is included in the Package?

You get a completely assembled engine with choice of OE Head or Ported / Gas Flowed Head. You get everything from Sump to Cam Cover. All that will be required is for you to move the engine ancillaries such as Sensors, Injectors, Alternator, Cylinder Head Temperature Sensor, Valve Control Solenoids, High Pressure Fuel Pump,  Vacuum Pump, and all accessories. As this is a full unit, every part from your car will bolt directly on from whichever model you have in which ever country you are situated. Our Engine builders have been building units to exacting specifications for many years, all tolerances are checked and optimised to the lowest possible settings. The Tappet Shims in the Cylinder Heads for instance are set to the tightest Ford Specification and therefore the motors run very quietly and efficiently.

 

Type 1 Red Top  300-350whp

The Type 1 engine is for the customer looking to upgrade their stock engine with one that can handle from Stock 200 bhp to the abuse of Hybrid Turbo or GTX. This engine is intended for use up to 350hp to the wheels and 7250rpm rev limit. A fantastic choice for those with an engine failure who are looking to get back up and running and never suffer with a premature failure again!

 

•   1.6 EcoBoost Block with Pumaspeed Block Mod Shim Kit installed
•   1.6 EcoBoost Crank,
•   Stock Ford OE Cylinder Head, Pressure tested then fully striped with valve seats re-cut and tappet clearances set to tightest OE Spec .
•   Pumaspeed Custom Piston Set with 0.2 lower compression than Stock with Skirt Coating and Blueprint Balanced
•   New Ford OE Water Pump
•   New Ford OE / DAYCO Timing Belt Kit
•   Stock Ford OE Camshafts  (Optional Upgrade to Pumaspeed Fuel Kit Cam) 
•   PEC H-Beam Rods with ARP Bolts.
•   King Main Bearings
•  Genuine Ford Tri-metalic Con Rod Bearings
•  Ford MLS Head Gasket
•  Stock Ford OE Head Bolts (Optional ARP Head Stud Kit Upgrade)
•  New Fuel Pump Tappet
•  Red Colour coded Sump
•  Red Colour coded Alternator Bracket
•  Red Colour coded Thermostat Housing

 

Type 2 Blue Top 350-400whp

The Type 2 engine is for the customer looking to upgrade their stock engine with one that can handle up to 400whp and beyond. From Giant G25-550 turbo Builds and extra fuel systems This engine is intended for use over 400bhp to the wheels and 8000rpm rev limit. A fantastic choice for those involved in motorsports with a real need for power and reliability.

 

•   1.6 EcoBoost Block with New Pumaspeed Straight Liners installed to bulletproof the Block Assembly
•   1.6 EcoBoost Crank, Polished and Balanced to customer Clutch and Flywheel of choice.
•   Option 2 Cylinder Head, Mild Porting / Gas Flowing to open the valve throats .
•   Stock Ford OE Camshafts  (Optional Upgrade to Pumaspeed Fuel Kit Cam) 
•   Pumaspeed Custom Piston Set with 0.2 lower compression than Stock with Skirt Coating and Blueprint Balanced
•   New Ford OE Oil Pump
•   New Ford OE Water Pump
•   New Ford OE / DAYCO Timing Belt Kit
•   Stock Ford OE Camshafts
•   Pumaspeed Custom I-Beam Rods with Stronger ARP Bolts Shadow Balanced End to End
•   King Main Bearings
•  Genuine Ford Tri-metalic Con Rod Bearings
•  Athena Head Gasket
•  ARP Head Stud Kit
•  New Fuel Pump Tappet
•  Blue Colour coded Sump
•  Blue Colour coded Alternator Bracket
•  Blue Colour coded Thermostat Housing
•  Pumaspeed Racing 80 Degree Thermostat
•  Full rotating assembly (Crank, Rods, and Pistons) is balanced to enable the motor to run at over 8000 revs

 

Type 3 Race Blue Top 400-450 whp

The Type 3 engine is the ultimate power unit for the EcoBoost owner, similar to the above Blue Top, but with brand new thick rimmed Ductile Iron Liners that can withstand power levels of well over 500whp. The blocks go through a very lengthy and precise CNC machining process to create what we believe to be the very strongest 1.6 ecoboost unit available to date.

There are many options to choose from such as Cams and Head Porting and Valve Springs, so which ever turbo you select we feel you would never be dissapointed with this motor. We can tailor the motor with different porting options and different Camshaft profiles to enhance any Turbo and Manifold combination. This engine is intended for use up to 450hp to the wheels and 8500rpm rev limit. A fantastic choice for those involved in the top end of motorsports with a need for ultimate Liner and Block reliability.

 

•   1.6 EcoBoost Block with Pumaspeed Racing Ductile Iron Stepped Sleeves fitted and honed to suit std or + size Pistons.
•   1.6 EcoBoost Crank, Polished and Balanced to customer Clutch and Flywheel of choice.
•   Option 3 Cylinder Head, Full Race Ported to open the Valve and Exhaust Throats whilst still maintaining engine response.
•   Pumaspeed Custom Pistons with 0.3 lower compression than Stock with Skirt Coating,
•   New Ford OE Oil Pump
•   New Ford OE Water Pump
•   New Ford OE / DAYCO Timing Belt Kit
•   Piper Cams Stage 1/2 Camshafts (Optional Upgrade to Pumaspeed Fuel Kit Cam) 
•   Piper Cams Single Valve Train Upgrade Kit with Spring Caps
•   Pumaspeed Custom I-Beam Rods with Stronger ARP Bolts
•   King Main Bearings
•  Genuine Ford Tri-metalic Con Rod Bearings
•  Stock Ford Head Gasket (we prefer this to the Athena)
•  ARP Head Stud Kit
•  New Fuel Pump Tappet
•  Blue Colour coded Sump
•  Blue Colour coded Alternator Bracket
•  Blue Colour coded Thermostat Housing
•  Pumaspeed Racing 80 Degree Thermostat
•  The Full rotating assembly (Crank, I-Beam Rods, Pistons and Clutch is balanced to enable the motor to run at over 8300 revs)

If you are looking for something a little Different to the above, please contact us with a specification in mind, or simply a power goal and we will assist in any way we can.

The graph below shows a red top motor fully fitted and running with the X47R Turbo charger

Please note that due to the complexity and timescales involved with a product such as this, delays can occur dependent on product availability etc. Call the Pumaspeed team, or e-mail Support@Pumaspeed.co.uk for more information.

Pumaspeed Motorsport Race EcoBoost 1.6 Engine

The Pumaspeed Workshop team are ready to fit the Pumaspeed 1.6 EcoBoost Race Red Top Engine in our Head Office located here.

We estimate the labour time to be approximately 11.00 hour(s) costing £1,128.60 inc VAT.

Therefore making parts and labour a total cost £4,723.60 (inc. VAT).

Please don�t hesitate to contact us on the phone number above or click here to email.

Note: The fitting cost quoted is an estimate based on our Ford tuning experience. Please be aware that on rare occasions problems can occur that are out of our control; such as seized or snapped bolts due to age or wear. We work swiftly but in the event of an issue we may have to levy the fitting charge based on the time taken to rectify any unforeseen circumstances.

Pumaspeed Performance Distribution

Pumaspeed have a specialist distribution team that can dispatch the Pumaspeed 1.6 EcoBoost Race Red Top Engine to any destination worldwide.

Please select the delivery country from the drop down list below to see the express delivery charge and set your shopping cart to the correct VAT rate.

UK: Mainland UK: Highlands and Islands UK: Isle of Man UK: Isle of Wight Channel Islands Northern Ireland Afghanistan Albania Algeria American Samoa Andorra Angola Anguilla Antarctica Antigua and Barbuda Argentina Armenia Aruba Australia Austria Azerbaijan Bahamas Bahrain Bangladesh Barbados Belarus Belgium Belize Benin Bermuda Bhutan Bolivia Bosnia and Herzegowina Botswana Bouvet Island Brazil British Indian Ocean Territory Brunei Darussalam Bulgaria Burkina Faso Burundi Cambodia Cameroon Canada Cape Verde Cayman Islands Central African Republic Chad Chile China Christmas Island Cocos (Keeling) Islands Colombia Comoros Congo Cook Islands Costa Rica Cote D'Ivoire Croatia Cuba Cyprus, North Cyprus, South Czech Republic Denmark Djibouti Dominica Dominican Republic East Timor Ecuador Egypt Eire El Salvador Equatorial Guinea Eritrea Estonia Ethiopia Falkland Islands (Malvinas) Faroe Islands Fiji Finland France French Guiana French Polynesia French Southern Territories Gabon Gambia Georgia Germany Ghana Gibraltar Greece Greenland Grenada Guadeloupe Guam Guatemala Guinea Guinea-bissau Guyana Haiti Heard and Mc Donald Islands Honduras Hong Kong Hungary Iceland India Indonesia Iran (Islamic Republic of) Iraq Israel Italy Jamaica Japan Jordan Kazakhstan Kenya Kiribati Korea, Democratic People's Republic of Korea, Republic of Kuwait Kyrgyzstan Lao People's Democratic Republic Latvia Lebanon Lesotho Liberia Libyan Arab Jamahiriya Liechtenstein Lithuania Luxembourg Macau Macedonia Madagascar Malawi Malaysia Maldives Mali Malta Marshall Islands Martinique Mauritania Mauritius Mayotte Mexico Micronesia, Federated States of Moldova, Republic of Monaco Mongolia Montserrat Morocco Mozambique Myanmar Namibia Nauru Nepal Netherlands Netherlands Antilles New Caledonia New Zealand Nicaragua Niger Nigeria Niue Norfolk Island Northern Mariana Islands Norway Oman Pakistan Palau Panama Papua New Guinea Paraguay Peru Philippines Pitcairn Poland Portugal Puerto Rico Qatar Reunion Romania Russian Federation Rwanda Saint Kitts and Nevis Saint Lucia Saint Vincent and the Grenadines Samoa San Marino Sao Tome and Principe Saudi Arabia Senegal Seychelles Sierra Leone Singapore Slovakia (Slovak Republic) Slovenia Solomon Islands Somalia South Africa South Georgia and South Sandwich Spain Spain: Canaries Sri Lanka St. Helena Sudan Suriname Svalbard and Jan Mayen Islands Swaziland Sweden Switzerland Syrian Arab Republic Taiwan Tajikistan Tanzania, United Republic of Thailand Togo Tokelau Tonga Trinidad and Tobago Tunisia Turkey Turkmenistan Turks and Caicos Islands Tuvalu Uganda Ukraine United Arab Emirates United States United States Minor Outlying Islands Uruguay Uzbekistan Vanuatu Vatican City State (Holy See) Venezuela Viet Nam Virgin Islands (British) Virgin Islands (U.S.) Wallis and Futuna Islands Western Sahara Zaire Zambia Zimbabwe

Are you a trade customer?

Pumaspeed have a specialist trade distribution team that service many of the Motor trade specialists throughout the UK, the EU and the Rest of the World.

From a simple email tune file to a huge shipment of Milltek Sport Exhaust Systems. We have an expanding portfolio of new brands and products combined with the experience and ability to provide what you need.

To register your interest as a company click here.

No Reviews Yet
Click to write the first review

To post a review to our Facebook page, please click the Facebook Log In button above. Next type your Email or Phone and associated Username into the popup login panel and click the Log In button to sign into Facebook. Finally type your review in the box provided below and click the Post Review button.

Review:

The Pumaspeed 1.6 EcoBoost Race Red Top Engine product has been listed by Pumaspeed as fitting the following vehicles:

Fiesta ST180 Mk7