MAXD Flash Programmer - Focus ST Diesel Stage 2R - Focus Mk3 ST Diesel - MAXD Flash Programmers - Pumaspeed Milltek Ford Performance Tuning Milltek Sport Exhaust Ford Fiesta Focus ST RS Parts Specialist

Stage 2R Smooth Safe Progressive Power and Torque

Delivery Cost?

RRP: £503.90 (inc. VAT)

Our Price: £479.90 (inc. VAT)

Fully Fitted: £479.90 (inc. VAT)

Order quantity (64 Sold)

MAXD Flash Programmer - Focus ST Diesel Stage 2R - Pumaspeed Remaps

For use with the DPF removed
Up to 250bhp
Up to 520nm
Smooth and safe power delivery
DIY fitted at home with the use of a Windows laptop
Astonishing torque

The Mk3 generation of Focus ST Diesel is perfect to tune. Ford have delivered a much more laid back power delivery than the ST250 petrol version, a little bit too laid back the Pumaspeed development team believed.

The Team looked at various methods to tune the new Focus ST Diesel and quickly called on experts at MAXD to develop not only a remap calibration but actually design the protocols to talk to the ECU as nothing was available at that time.

The MAXD boys took the customer donated development car in hand and in the space of 2 weeks developed the communication protocols and the new Stage 1 MAXD remap to allow the DIY enthusiast to do all the tuning at home using the programmer shown in the photos.

Once stage 1 was complete we had demand from customers wanting that little bit more. Whilst not possible with the stock hardware, only minor hardware changes are required to unlock further potential from your ST Diesel. The MAXD Stage 2 system now covers the Focus ST Diesel Mk3 and delivers more power and torque than any other tuning system, adding up to an additional 65 bhp and delivering a monstrous 120nm of extra torque. Those sound like the power figures of a real hot hatch and make the Focus ST Diesel a real gem to drive with effortless pulling power and urgency.

MAXD keep the power delivery smooth and progressive, but add enough excitement to make the car feel more like a true performance car rather than an mundane diesel. Through testing the stage 1 map was found to deliver peak torque a staggering 500rpm lower in the rev range than compared to stock and the Bluefin. This low down kick of torque gives you effortless acceleration and in gear pace, no need to work the gearbox and engine too hard when going for an overtake. Stage 2 is another level again, allow the car to breath and get the exhuast gasses out quickly greatly increases performance when tied in with the remap.

The Stage 2R MAXD box contains the following tuning files:

Stage 2R - 240-250bhp and 510-530nm

Is the MAXDOUT mapping warranty safe?
- Yes we believe so, the MAXD flash programmer has a unique feature, it allows you to read and store the original file on any Windows PC! This saved file can, at any time, be re-installed to the car and the vehicle taken into Ford for any recall works.

- The programmer can be used to upload and download an unlimited number of times but after recall works please contact Pumaspeed again as Ford may have uploaded a new stock firmware version that may need one of our updated files

What happens to my stock mapping?
- This will be read and will be saved on the laptop for re-use at any time and as many times as you wish.

What if my car is already mapped?
- Your ECU will be read by the software and this will be treated as the stock mapping for your car. We do have stock maps available and these can be included if required.

Is the software easy DIY install on and off the car?
- Yes the custom software is very simple to use and runs on any Windows laptop.

Can I upgrade the maps to a higher level?
- Yes the benefit of the system is that MAXD can easily send you upgraded files from the above list as you upgrade the hardware to suit.

Can MAXD write a custom file to suit my list of mods?
- Yes the in house calibration specialists at MAXD can tailor a mapping to suit you and your driving style. Whilst MAXD research and development does run through most case scenarios there will always be the requirement for that one off special.

Can I use the device on more than one vehicle?
- No the MAXD device locks itself you your vehicles VIN number and cannot be used on another vehicle.

Does the mapping affect the immobilizer ?
- MAXD maps will not affect the vehicle immobilizer in any way.

Do we think its the best?
- The simple answer is YES, Pumaspeed and internet forum owner testing has shown all the MAXD mappings to be higher powered than every other branded mapping, including some very well known names.

MAXD Flash Programmer - Focus ST Diesel Stage 2R

There is no fitting cost available for this product.

Pumaspeed Performance Distribution

Pumaspeed have a specialist distribution team that can dispatch the MAXD Flash Programmer - Focus ST Diesel Stage 2R to any destination worldwide.

Please select the delivery country from the drop down list below to see the express delivery charge and set your shopping cart to the correct VAT rate.

Are you a trade customer?

Pumaspeed have a specialist trade distribution team that service many of the Motor trade specialists throughout the UK, the EU and the Rest of the World.

From a simple email tune file to a huge shipment of Milltek Sport Exhaust Systems. We have an expanding portfolio of new brands and products combined with the experience and ability to provide what you need.

To register your interest as a company click here.

No Reviews Yet
Click to write the first review

The MAXD Flash Programmer - Focus ST Diesel Stage 2R product has been listed by Pumaspeed as fitting the following vehicles:

Focus Mk3 ST Diesel

Mondeo TDCi

Model Select

Wishlists

You are here: Home | MAXD Flash Programmers | MAXD Flash Programmer - Focus ST Diesel Stage 2R

MAXD Flash Programmer - Focus ST Diesel Stage 2R - Focus Mk3 ST Diesel

MAXD Flash Programmer - Focus ST Diesel Stage 2R - Pumaspeed Remaps

MAXD Flash Programmer - Focus ST Diesel Stage 2R

Pumaspeed Performance Distribution

Are you a trade customer?

Contact Us

Follow Us

Payment Methods