*BF24* R-Sport Pro 400 GEN2 Intercooler Fiesta ST180 - Fiesta ST180 Mk7

R-Sport Pro- 50mm Core

Delivery Cost?

RRP: £429.90 (inc. VAT)

Our Price: £365.00 (inc. VAT)

Fully Fitted: £467.60 (inc. VAT)

Order quantity  (227 Sold)

Intercooler Colour
Satin Black Satin Silver (+� 6.00) (inc. VAT)

Logo Option :
No LogoRed / whiteBlue / WhiteCustom Colour - leave message at check outRed / BlackBlue / Black

Hard Pipe Kit
No Hard Pipe KitAdd Hard Pipe Kit save 12 from rrp (+� 86.00) (inc. VAT)

Tweet

R-Sport Pro 400 GEN 2 Intercooler Fiesta ST180 - R-Sport Pro Intercoolers

• Proven to 500bhp
• Super Efficient Dense Fin Bar and Plate Core
• 100% Alloy Construction
• Easy DIRECT FIT to all OE Pipework
• 2 Year warranty for the first owner
• WRC Style Angled Cooler

All Intercoolers are not made equal, most full height Intercoolers use a 40mm core for their cooling but the NEW GEN 2 Pro 400 uses a very efficient  Dense Fin Bar and Plate Type 50mm Core, so it's 25% larger than any other full sized cooler on the market. 

This unit is the ONLY ST FIESTA INTERCOOLER TO BE PROVEN TO OVER 500BHP by Pumaspeed on our 1.6 EcoBoost Mk8

As Tested on the Pumaspeed 500bhp Fiesta Below

R-Sport Pro 400 - The Ultimate Affordable Intercooler 

The design team were asked to produce a cooler that would allow the X-47R and the new X-57R turbos to work to well over 400 bhp. The only way to run that sort of power from an intercooler is to increase the size of the core. The GEN 1 Pro 400 unit already ran a full height core so the only way to go was to run a thicker core. Therefore, out goes the industry standard 40mm and in comes the next generation 50mm core that is 25% larger, increasing cooling performance massively.

Together with this, the cooler is positioned on the car at a slight angle meaning the top is slightly further forward than the bottom, much like on WRC cars. This has the effect of catching more air than a conventional cooler as the majority of the air over the front of the car would be flowing up towards the bonnet and over the car.

The next design feature was the entry angles of the end tanks, we've purposely angled these upwards, forcing the air from the lower portions up to the top of the cooler, again, improving the intercooler efficiency. This unit is a direct replacement for the stock Ford intercooler and it supports power outputs in excess of 400 bhp which will suit all Pumaspeed X Series Hybrid Turbos and GTX Power Kits.

These design features are certainly a step forward for ST180 power generation!

A review by Stealthwerx of Norfolk

"It's a winner!

 

Finally some data for the new Pro 400 Gen 2 from Pumaspeed's own brand R-Sport. I have literally had the bumper off this car 10 times or more, trying out every cooler I can get my hands on!

 

Remembering the spec of my car, as its very relevant, you cannot compare temps from a hybrid to that of a MAXD Out 2R. So, X47R, V4902B software, currently pushing insane boost nearly 1.9 bar (On TS Actuator for base file testing but going back to Forge shortly which will lower boost at top end to more sensible levels). So really this is what to expect from an X47R flat out, not a normal end user set up that I dial back a bit.

The coolers to beat are the Airtec Stage 3 and the Wagner, and the New Pro 400 GEN 2 certainly delivers. After an average result on the original Pro 400 which used a very lightweight tube and fin core, Pumaspeed took on board this criticism and put together a pretty unbeatable unit. With 2 x 4th gear pulls, the max it went over ambient was 11c which is on par with the larger stepped core of the Airtec. It's a little better than the Wagner too, which is normally 12-14c over ambient. These are extreme 1500-7000rpm pulls in 4th, lots of load, hitting ***mph each time.

 

Recovery seems good too - Not as rapid as the Wagner, but certainly no slower than the Airtec and a good sign is temps dropping when on boost initially. Pressure drop is hard to measure by just throwing on a cooler, but turbo duty cycle is an indicator, and it was a few % lower than the Airtec, showing that the smaller volume has a slightly beneficial effect as the turbo is working less hard to meet demand. In terms of driving, I could tell no difference in response, it was already top notch. I'm very pleased that we have a competitive R-Sport cooler we can recommend to customers. I haven't dyno'ed yet, but as Airtec and Wagner cars are always very similar, I'd expect it to be pretty much the same. 

 

With a cost from just £429 inc VAT with a satin black finish, its amazing value for money, and should be a serious consideration for any ST180 owner, well done Pumaspeed!"

 

 

 

As Tested on the Pumaspeed 500bhp Fiesta Below

 

 

R-Sport Pro 400 GEN 2 Intercooler Fiesta ST180

The Pumaspeed Workshop team are ready to fit the *BF24* R-Sport Pro 400 GEN2 Intercooler Fiesta ST180 in our Head Office located here.

We estimate the labour time to be approximately 1.00 hour(s) costing £102.60 inc VAT.

Therefore making parts and labour a total cost £467.60 (inc. VAT).

Please don�t hesitate to contact us on the phone number above or click here to email.

Note: The fitting cost quoted is an estimate based on our Ford tuning experience. Please be aware that on rare occasions problems can occur that are out of our control; such as seized or snapped bolts due to age or wear. We work swiftly but in the event of an issue we may have to levy the fitting charge based on the time taken to rectify any unforeseen circumstances.

Pumaspeed Performance Distribution

Pumaspeed have a specialist distribution team that can dispatch the *BF24* R-Sport Pro 400 GEN2 Intercooler Fiesta ST180 to any destination worldwide.

Please select the delivery country from the drop down list below to see the express delivery charge and set your shopping cart to the correct VAT rate.

UK: Mainland UK: Highlands and Islands UK: Isle of Man UK: Isle of Wight Channel Islands Northern Ireland Afghanistan Albania Algeria American Samoa Andorra Angola Anguilla Antarctica Antigua and Barbuda Argentina Armenia Aruba Australia Austria Azerbaijan Bahamas Bahrain Bangladesh Barbados Belarus Belgium Belize Benin Bermuda Bhutan Bolivia Bosnia and Herzegowina Botswana Bouvet Island Brazil British Indian Ocean Territory Brunei Darussalam Bulgaria Burkina Faso Burundi Cambodia Cameroon Canada Cape Verde Cayman Islands Central African Republic Chad Chile China Christmas Island Cocos (Keeling) Islands Colombia Comoros Congo Cook Islands Costa Rica Cote D'Ivoire Croatia Cuba Cyprus, North Cyprus, South Czech Republic Denmark Djibouti Dominica Dominican Republic East Timor Ecuador Egypt Eire El Salvador Equatorial Guinea Eritrea Estonia Ethiopia Falkland Islands (Malvinas) Faroe Islands Fiji Finland France French Guiana French Polynesia French Southern Territories Gabon Gambia Georgia Germany Ghana Gibraltar Greece Greenland Grenada Guadeloupe Guam Guatemala Guinea Guinea-bissau Guyana Haiti Heard and Mc Donald Islands Honduras Hong Kong Hungary Iceland India Indonesia Iran (Islamic Republic of) Iraq Israel Italy Jamaica Japan Jordan Kazakhstan Kenya Kiribati Korea, Democratic People's Republic of Korea, Republic of Kuwait Kyrgyzstan Lao People's Democratic Republic Latvia Lebanon Lesotho Liberia Libyan Arab Jamahiriya Liechtenstein Lithuania Luxembourg Macau Macedonia Madagascar Malawi Malaysia Maldives Mali Malta Marshall Islands Martinique Mauritania Mauritius Mayotte Mexico Micronesia, Federated States of Moldova, Republic of Monaco Mongolia Montserrat Morocco Mozambique Myanmar Namibia Nauru Nepal Netherlands Netherlands Antilles New Caledonia New Zealand Nicaragua Niger Nigeria Niue Norfolk Island Northern Mariana Islands Norway Oman Pakistan Palau Panama Papua New Guinea Paraguay Peru Philippines Pitcairn Poland Portugal Puerto Rico Qatar Reunion Romania Russian Federation Rwanda Saint Kitts and Nevis Saint Lucia Saint Vincent and the Grenadines Samoa San Marino Sao Tome and Principe Saudi Arabia Senegal Seychelles Sierra Leone Singapore Slovakia (Slovak Republic) Slovenia Solomon Islands Somalia South Africa South Georgia and South Sandwich Spain Spain: Canaries Sri Lanka St. Helena Sudan Suriname Svalbard and Jan Mayen Islands Swaziland Sweden Switzerland Syrian Arab Republic Taiwan Tajikistan Tanzania, United Republic of Thailand Togo Tokelau Tonga Trinidad and Tobago Tunisia Turkey Turkmenistan Turks and Caicos Islands Tuvalu Uganda Ukraine United Arab Emirates United States United States Minor Outlying Islands Uruguay Uzbekistan Vanuatu Vatican City State (Holy See) Venezuela Viet Nam Virgin Islands (British) Virgin Islands (U.S.) Wallis and Futuna Islands Western Sahara Zaire Zambia Zimbabwe

Are you a trade customer?

Pumaspeed have a specialist trade distribution team that service many of the Motor trade specialists throughout the UK, the EU and the Rest of the World.

From a simple email tune file to a huge shipment of Milltek Sport Exhaust Systems. We have an expanding portfolio of new brands and products combined with the experience and ability to provide what you need.

To register your interest as a company click here.

No Reviews Yet
Click to write the first review

To post a review to our Facebook page, please click the Facebook Log In button above. Next type your Email or Phone and associated Username into the popup login panel and click the Log In button to sign into Facebook. Finally type your review in the box provided below and click the Post Review button.

Review:

The *BF24* R-Sport Pro 400 GEN2 Intercooler Fiesta ST180 product has been listed by Pumaspeed as fitting the following vehicles:

Fiesta ST180 Mk7